Our driveway gates are custom fabricated for your driveway and installed professionally to provide decades of service.   Ordering a gate and having it installed with openers has never been easier. Follow the simple steps on this page and begin enjoying your gates right away. 

   Features

• Gate Frame - 2" square, 11 gauge tubing
• Cross Members - 2" x 1" Channel (punched where appropriate)
• Upright Pickets - 3/4", 16 gauge tubing
• Hinges - Heavy duty hinges, capable of supporting a gate  over 3 times heavier
• Posts - Heavy duty 5" x 5" tubing, providing permanent staying power
• Paint - Commercial Grade Primer and Finish Coats

  Measure Your Driveway

• Our gates are priced in 3 size ranges: 12-15 feet, 15-18 feet, and 18-21 feet.
• The measurement we need to know is the entire opening size.
• Make sure to allow at least 12" on each side of the driveway for the posts.
• If you need a different size, just call us (615-948-6570) or email.

  Swing Type

• All of the gates in this collection are dual swinging gates (as opposed to sliding), but can be built as sliding gates as well. Just call (615-948-6570) or email.
• They swing on hinge posts away from incoming traffic and into the property.
• IIf your driveway slopes up too steeply you'll need to have a gate that swings toward incoming traffic (this is rare). Just call us (615-948-6570) or email.

  Support Posts

• Our Ready Gate's are designed to hang on their own set of gate posts.
• If you have a masonry pillar it is usually best for us to set our posts just behind the pillar.